Tips To Generate Good Car Paint

Published: Dec 26th, 2009 | Author: kifni Add Comment

Every owner of a car, definitely want to have a bright color on the car mount. Although the status of the old car, but no harm in having a bright color shades, so it looks like a new car. Whatever the cost to be issued, no problem for him. Most importantly, the car looks more beautiful than before. However, there is also a cat wants to get maximum results, although only the cost is quite cheap.
Therefore, Ari Purwanto, as Mirza modifikator Auto Care, a special tips, in order to get maximum results paint, with minimal cost. First of all, before doing the painting, should be considered first over car body, whether naked or nothing about body putty. Then, the car must also be checked, whether the corrugated metal panel or not, whether the seedlings had emerged rust or bell.
After checking everything and the car is in good condition, so do pendempulan process. Putty endeavored not too thick or thin, so when do get the most out of painting. But before you do great sandpaper first, ie for the former berets, and sandpaper is wrong. After pendempulan finished, then the painting is done by using a spray gun.

Typically, the use of spray gun using air pressure / HVLP (High Volume Low Pressure) measuring between 2.5 to 3 bar. And to obtain maximum color, spray gun application, must be within 15 cm of the car body. “In the painting, a maximum of only 3 layers only. Because if the use of layers exceeds predetermined, not only will accumulate layers, but also a wasteful use. And, in the paint for the next layer, there should be a grace time for 5 minutes prior to the next layer, “added Ari.
For the painting process, try to always use a direct spray paint, without having to use thinners, to be more frugal. The result would be the same, whether to paint with thinners or without thinners. However, if one wants to continue using paint thinners, must be in accordance with their proportion of 5% for each use 1 liter of paint. Because when too much use of thinners, would be wasteful. And the painting will also look less good. After the painting process is complete, of course, we also want to look more shiny cars. Therefore, do not forget the paint on the pernish. In doing pernish, mixture based pernish never feeling, but it must be in accordance with their proportion. Moreover, the latest pernish sold in the market, already have higher technology than the previous output.

Related posts:

There are no comments to this entry yet
Add Comment
Name (required)
E-mail address (required, will not be published)
Website